Comparison of the advantages of high-pressure cleaners and traditional cleaning methods

The traditional method of cleaning heat transfer oil carbonization and coking scale:

1. Chemical cleaning

The chemical cleaning method uses chemical agents to chemically or physically react with scales under certain conditions to remove dirt. As for the coke fouling produced by heat transfer oil, most of them are cleaned by organic solvents. The main principle of action is physical dissolution. However, in actual operation, there will be disadvantages such as unsatisfactory cleaning effect, high cleaning cost and environmental pollution. In addition, when the pipeline is severely blocked by rust, it cannot be cleaned.

2. Manual cleaning

The common methods of manual cleaning are steel brazing, hammer smashing, electric hammer drill and other methods. The results are not ideal. There are disadvantages such as easy damage to equipment, high labor intensity of workers, and insignificant cleaning effect.           The advantages and disadvantages of the high-pressure cleaner and the traditional cleaning method to clean the carbonization and coking scale of the thermal oil:

1. Chemical cleaning

The advantages of using chemical cleaning methods to clean the carbonization and coking scales of thermal oil are better cleaning effect and less labor intensity, but the cleaning cost is very high. The use of organic cleaning agent requires about 100 yuan/m², and the inorganic cleaning agent is about 80 yuan/m². . In addition, chemical cleaning will inevitably produce the volatilization of waste liquid and the agent itself, which can easily cause pollution to the environment.

2. Manual cleaning

The advantages of using manual steel brazing, hammer smashing, electric hammer drill and other methods to clean the carbonization and coking scale of heat transfer oil are low cleaning cost and little environmental pollution, but the disadvantages are also obvious, with poor cleaning effect, low cleaning efficiency and labor High intensity.

3. Use a high-pressure cleaner to clean

The use of a high-pressure cleaner to clean the carbonized coking scale of the thermal oil has the advantages of chemical cleaning and manual cleaning, but does not have the disadvantages of both. The high-pressure water jet uses the combined action of stamping, wedge splitting and shearing to break the carbonized and coking scale of the heat transfer oil in the pipe, and push and pull the fluid to discharge the dirt from the pipe hole. This cleaning method has a good cleaning effect. , Low cleaning cost, low environmental pollution, high cleaning efficiency, low labor intensity and a series of advantages, is a high-pressure cleaning equipment that is very worthy of promotion.


Website: High Pressure Washers Manufacturer
Email: uicleanmachine@gmail.com
Whatsapp:+86 18638135001
Phone:+86 18638135001
Link: Sitemap